Download Raspbian with CAN and RTC

For Raspberry Pi3:

Download the official ISO from www.raspberrypi.org 2016-03-18 Raspbian Jessie

Edit /boot/config.txt modify the following row

dtoverlay=mcp2515-can0-overlay,oscillator=16000000,interrupt=22
dtoverlay=mcp2515-can1-overlay,oscillator=16000000,interrupt=25

After that

sudo reboot

Or download our ready to use ISO derived from 2016-03-18 Raspbian Jessie, kernel upgrade not required… Download all the 4 files and use 7zip to extract the image file.

Part 1
Part 2
Part 3
Part 4

Normal login:

user: pi
password: raspberry

Run: sudo raspi-config to expand the filesystem.

For Raspberry Pi2 and older versions:

The last ready to use ISO Canberry_ISO_Kernel_4.1.7+ derived from Raspbian Jessie 2015-09-24 (Kernel 4.1.7+ )

Download both the two 7zip files, in order to extract the single ISO:

Part 1
Part 2

Normal login:

user: pi
password: raspberry

Run: sudo raspi-config to expand the filesystem.

OLD ISO

The ready to use ISO is cross compiled by “Alain Weisz (weisz.alain@weisz-technologie.com): including eGALAX Touch screen support”. It is derived from Raspbian (kernel 3.18.7-v7) and works on Raspberry Pi B+ 2.

Download Alain’s ISO:

Part 1
Part 2
Part 3
Part 4

You can use HDDRawCopy1.10 to write the ISO.

Normal login:

user: pi
password: raspberry

Root login:

user: root
password: raspberryroot

The ready to use ISO is derived from Raspbian 2014-09-09. This ISO is tested on Raspberry Pi B Rev 1, B Rev2 and B+.

If you have canbus hang use the modules in the following link to Ilya website:

http://ifinterface.com/page/page3.php?langid=1

It’s possible download the modules for
Raspbian 3.18.7+
Raspbian 3.12.35+

For skilled linux users it’s possible to read this guide ( http://skpang.co.uk/blog/archives/1165 ) to prepare the ISO by yourself.

Download my Raspbian:

Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7